0086-755-29195755
Floor 8, Bldg. 1, Shilong Keyan Park Ind. Zone, Waihuan Road, Shilong Community, Shenzhen, Guangdong, China (Mainland)
14years' factory Type C NVME m.2 ssd usb flash drive enclosures
Features:
supports USB 3.1 GEN2 Type C NVMe PCIe m.2 SSD card
Description:
Welcome your OEM for OEM USB 3.1 GEN2 Type C NVMe PCIe m.2 SSD enclosure
|
Adapter allows the installation of SSD as system disk, boot the operating system directly, without having to install any drivers,it does not affect the execution speed of the SSD storage devices.
The Type-C is most likely to become a future connection standards and provide data transmission, peripherals, display output, integrated connectivity solutions.
* Super data transmission speeds:
1. Red part, they miss electronic components, MOS and Triode. There will be no electric current protection and may damage your SSD, also cannot support sleeping mode(sleeping mode can prolong your SSD useful life).
2.Pink part, this flash cost is very low. As far as we know, it was unable to upload firmware and made ssd cannot be recognized.
3.Green part, the inductor is bad quality, which might make the electric current not enough and unable to support some brands SSD.
It seems the filter capacitor with small capacity, which will make whole PCB cannot provide enough power to SSD.
4.Yellow part, they miss stabilivolt and Anti-static tube.
5.Black part, the connector is not good. The elastic sheet will be easily loose after use some times and disconnection will happen.
Our connector is Bellwether brand(made in Taiwan).
The item Installation Instructions: 1.carefully inser the NVME PCIe M.2 SSD into the enclosure 2.secure the SSD with the screws on the board 3.close the enclosure and secure the screws if need 4.connect the enclosure to the computer with the supplied usb cable |
photos like below,
1.Q: Are you a factory or trading company?
A: We are a factory which have our own professional R&D and production team.
2.Q:How can I get some samples? A: We are honored to offer you samples.
3.Q:How does your factory do regarding quality control?
A:Quality is priority. Wewill always attach great importance to quality control from beginning to end for each procedure.Also our factory has passed CE,FCC,ROHS authentication.
4.Q: What payment terms will you accept?
A: T/T, West Union, Paypal
5.Q: How about the delivery lead time?
A: The lead time depends on order quantity.
6.Q:Where is your factory located? How can I visit there?
A:Our factory located in Shenzhen, China. Only half an hour from Shenzhen airport to our factory.
7. Q: What type of quoted prices you will provide?
A: FOB, CIF, EXW
8. Q: How about the products warranty & guarantee and after-sales service?
A: All the products which you buy from our factory is warranty all the time, if any quality problem while you get them, pleasecontact us replaced goods will be arranged immediately.
Quality Assurance and After-sales Service
- Provide spare and accessory parts
- If the rate of defective products is beyond acceptable, and its functional problem due to the design and assembly, we could provide replacinggoods.
- Our engineer could provide you professional service and technical support everywhere anytime you want.
